转自: https://blog.csdn.net/u011913612/article/details/52503318

Android编译系统分析系列文章： android编译系统分析（一）-source build/envsetup.sh与lunch Android编译系统（二）-mm编译单个模块 android编译系统分析（三）-make android编译系统（四）-实战：新增一个产品 Android编译系统分析（五）-system.img的生成过程

我们在完整编译android系统的时候，最终会生成几个重要的镜像文件，其中有system.img,userdata.img,ramdisk.img等。这篇文章的目的是分析system.img的生成过程。回想下我们完整编译android系统时的动作，我们会在android源码顶级目录执行make命令，这样就会完整的编译android系统，我们没有传入任何参数（-jx等加快编译的除外）,因为我们没有明确指定make的目标，所以android编译系统会执行默认的编译目标，也就是droid。因此，我们还是从droid着手，看看system.img怎么生成。

我们只关注system.img相关的部分，其他部分都忽略，因此会有如下依赖关系： system.img生成依赖图

一.systemimage

# Rules that need to be present for the all targets, even
# if they don't do anything.
.PHONY: systemimage
systemimage:

sytemimage是一个伪目标，它并不会被生成。

systemimage: $(INSTALLED_SYSTEMIMAGE)

systemimage依赖于$(INSTALLED_SYSTEMIMAGE)

二.$(INSTALLED_SYSTEMIMAGE)

INSTALLED_SYSTEMIMAGE := $(PRODUCT_OUT)/system.img

INSTALLED_SYSTEMIMAGE变量的值就是system.img了，也就是说它就是我们最终要生成的目标。那么看看它的定义：

$(INSTALLED_SYSTEMIMAGE): $(BUILT_SYSTEMIMAGE) $(RECOVERY_FROM_BOOT_PATCH) | $(ACP)
    @echo "Install system fs image: $@"
    $(copy-file-to-target)
    $(hide) $(call assert-max-image-size,$@ $(RECOVERY_FROM_BOOT_PATCH),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))

(INSTALLEDSYSTEMIMAGE)有依赖了 (BUILT_SYSTEMIMAGE) 和(RECOVERYFROMBOOTPATCH)以及(ACP），我们目前无法知道这三个变量是什么，当然，这里的(ACP)是一种read−only依赖，也就是说(ACP)发生改变时，编译器并不会重新生成system.img,(ACP)其实代表的是acp可执行文件，这个执行文件由acp.c文件生成，代码在build/tools/acp/目录下。因此，acp是一个生成system.img过程中使用的工具，它的改变不会使system.img立刻重新生成。虽然我们暂且不知道

(BUILT_SYSTEMIMAGE) 和$(RECOVERY_FROM_BOOT_PATCH)代表的是什么，但是我们可以先看看system.img的生成规则，看看生成规则是怎么使用这三个依赖来生成system.img镜像文件的的。

2.1 `$(copy-file-to-target)`

copy-file-to-target的定义如下：

# Copy a single file from one place to another,
# preserving permissions and overwriting any existing
# file.
# We disable the "-t" option for acp cannot handle
# high resolution timestamp correctly on file systems like ext4.
# Therefore copy-file-to-target is the same as copy-file-to-new-target.
define copy-file-to-target
@mkdir -p $(dir $@)
$(hide) $(ACP) -fp $< $@
endef

结合注释，这段代码的功能是拷贝文件，并且在拷贝的过程中会保留文件的权限和覆盖已有的文件。代表的是第一个依赖，也就是这里的(built_systemimage)，这里首先会创建 out target product xxx 目录，其中xxx是产品名，然后把

2.2 assert-max-image-size

紧随其后的assert-max-image-size函数又做了什么呢?调用它的时候传入了两个参数，分别是1.system.img 2.(RECOVERYFROMBOOTPATCH), (BOARD_SYSTEMIMAGE_PARTITION_SIZE) (RECOVERYFROMBOOTPATCH)是一个补丁文件：RECOVERYFROMBOOTPATCH:=

(intermediates)/recovery_from_boot.p $(BOARD_SYSTEMIMAGE_PARTITION_SIZE)则是一个数字，不同的产品这个数字不同： BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736 assert-max-image-size的定义如下：

# Like assert-max-file-size, but the second argument is a partition
# size, which we'll convert to a max image size before checking it
# against the files.
#
# $(1): The file(s) to check (often $@)
# $(2): The partition size.
define assert-max-image-size
$(if $(2), \
  $(call assert-max-file-size,$(1),$(call image-size-from-data-size,$(2))))
endef

image-size-from-data-size函数如下：

# Convert a partition data size (eg, as reported in /proc/mtd) to the
# size of the image used to flash that partition (which includes a
# spare area for each page).
# $(1): the partition data size
define image-size-from-data-size
$(strip $(eval _isfds_value := $$(shell echo $$$$(($(1) / $(BOARD_NAND_PAGE_SIZE) * \
  ($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE))))))\
$(if $(filter 0, $(_isfds_value)),$(shell echo $$(($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE)))),$(_isfds_value))\
$(eval _isfds_value :=))
endef

可以看到这个函数对分区大小做一个转换，转换为flash芯片上的分区大小。之后把转换后的结果传给assert-max-file-size作为第二个参数。 assert-max-file-size定义如下：

# $(1): The file(s) to check (often $@)
# $(2): The maximum total image size, in decimal bytes.
#    Make sure to take into account any reserved space needed for the FS.
#
# If $(2) is empty, evaluates to "true"
#
# Reserve bad blocks.  Make sure that MAX(1% of partition size, 2 blocks)
# is left over after the image has been flashed.  Round the 1% up to the
# next whole flash block size.
define assert-max-file-size
$(if $(2), \
  size=$$(for i in $(1); do $(call get-file-size,$$i); echo +; done; echo 0); \
  total=$$(( $$( echo "$$size" ) )); \
  printname=$$(echo -n "$(1)" | tr " " +); \
  img_blocksize=$(call image-size-from-data-size,$(BOARD_FLASH_BLOCK_SIZE)); \
  twoblocks=$$((img_blocksize * 2)); \
  onepct=$$((((($(2) / 100) - 1) / img_blocksize + 1) * img_blocksize)); \
  reserve=$$((twoblocks > onepct ? twoblocks : onepct)); \
  maxsize=$$(($(2) - reserve)); \
  echo "$$printname maxsize=$$maxsize blocksize=$$img_blocksize total=$$total reserve=$$reserve"; \
  if [ "$$total" -gt "$$maxsize" ]; then \
    echo "error: $$printname too large ($$total > [$(2) - $$reserve])"; \
    false; \
  elif [ "$$total" -gt $$((maxsize - 32768)) ]; then \
    echo "WARNING: $$printname approaching size limit ($$total now; limit $$maxsize)"; \
  fi \
 , \
  true \
 )
endef

这个函数对system.img的大小做一个检查，如果system.img太大，超过了flash允许的最大分区的大小，这里就会报错。因此，assert-max-image-size函数可以理解为检查system.img的合法性。

三.$(BUILT_SYSTEMIMAGE)

我们分析system.img的生成规则发现，system.img其实是(BUILTSYSTEMIMAGE)的一份拷贝。那么 (BUILT_SYSTEMIMAGE)又是怎么生成的呢？ (BUILTSYSTEMIMAGE)其实也是一个sytem.img文件，只不过它在(systemimage_intermediates)目录下： BUILT_SYSTEMIMAGE := (systemimageintermediates)/system.img

(systemimage_intermediates) ：= target/product/xxx/obj/PACKAGING/systemimage_intermediates $(BUILT_SYSTEMIMAGE)的依赖与生成规则如下：

$(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE)
    $(call build-systemimage-target,$@)

我们不知道它依赖的是什么，但是我们可以先看一下它的生成规则： build-systemimage-target函数定义如下：

# $(1): output file
define build-systemimage-target
  @echo "Target system fs image: $(1)"
  $(call create-system-vendor-symlink)
  @mkdir -p $(dir $(1)) $(systemimage_intermediates) && rm -rf $(systemimage_intermediates)/system_image_info.txt
  $(call generate-userimage-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt, \
      skip_fsck=true)
  $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH \
      ./build/tools/releasetools/build_image.py \
      $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \
      || ( echo "Out of space? the tree size of $(TARGET_OUT) is (MB): " 1>&2 ;\
           du -sm $(TARGET_OUT) 1>&2;\
           if [ "$(INTERNAL_USERIMAGES_EXT_VARIANT)" == "ext4" ]; then \
               maxsize=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE); \
               if [ "$(BOARD_HAS_EXT4_RESERVED_BLOCKS)" == "true" ]; then \
                   maxsize=$$((maxsize - 4096 * 4096)); \
               fi; \
               echo "The max is $$(( maxsize / 1048576 )) MB." 1>&2 ;\
           else \
               echo "The max is $$(( $(BOARD_SYSTEMIMAGE_PARTITION_SIZE) / 1048576 )) MB." 1>&2 ;\
           fi; \
           mkdir -p $(DIST_DIR); cp $(INSTALLED_FILES_FILE) $(DIST_DIR)/installed-files-rescued.txt; \
           exit 1 )
endef

这个函数做了四件事情：

1.create-system-vendor-symlink

define create-system-vendor-symlink
$(hide) if [ -d $(TARGET_OUT)/vendor ] && [ ! -h $(TARGET_OUT)/vendor ]; then \
  echo 'Non-symlink $(TARGET_OUT)/vendor detected!' 1>&2; \
  echo 'You cannot install files to $(TARGET_OUT)/vendor while building a separate vendor.img!' 1>&2; \
  exit 1; \
fi
$(hide) ln -sf /vendor $(TARGET_OUT)/vendor
endef

如果存在vendor目录，就给vendor目录创建一个软连接。

2.创建target/product/xxx/obj/PACKAGING/systemimage_intermediates目录并删除这个目录下的system_image_info.txt文件。

3.重新向system_image.info.txt中写入数据

# $(1): the path of the output dictionary file
# $(2): additional "key=value" pairs to append to the dictionary file.
define generate-userimage-prop-dictionary
$(if $(INTERNAL_USERIMAGES_EXT_VARIANT),$(hide) echo "fs_type=$(INTERNAL_USERIMAGES_EXT_VARIANT)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_HAS_EXT4_RESERVED_BLOCKS),$(hide) echo "has_ext4_reserved_blocks=$(BOARD_HAS_EXT4_RESERVED_BLOCKS)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT),$(hide) echo "system_squashfs_compressor_opt=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR_OPT)" >> $(1))
$(if $(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "userdata_fs_type=$(BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_USERDATAIMAGE_PARTITION_SIZE),$(hide) echo "userdata_size=$(BOARD_USERDATAIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "cache_fs_type=$(BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1))
$(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1)
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(VERITY_SIGNER)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VBOOT_SIGNING_KEY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "futility=$(FUTILITY)" >> $(1))
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot_signer_cmd=$(VBOOT_SIGNER)" >> $(1))
$(if $(filter true,$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)),\
    $(hide) echo "system_root_image=true" >> $(1);\
    echo "ramdisk_dir=$(TARGET_ROOT_OUT)" >> $(1))
$(if $(2),$(hide) $(foreach kv,$(2),echo "$(kv)" >> $(1);))
endef

4.使用build_image.py脚本生成system.img镜像文件。

四.$(FULL_SYSTEMIMAGE_DEPS)

FULL_SYSTEMIMAGE_DEPS又有以下两部分组成： FULL_SYSTEMIMAGE_DEPS := (INTERNALSYSTEMIMAGEFILES)

(INTERNAL_USERIMAGES_DEPS)

1.$(INTERNAL_SYSTEMIMAGE_FILES)

INTERNAL_SYSTEMIMAGE_FILES := $(filter $(TARGET_OUT)/%, \
    $(ALL_PREBUILT) \
    $(ALL_COPIED_HEADERS) \
    $(ALL_GENERATED_SOURCES) \
    $(ALL_DEFAULT_INSTALLED_MODULES) \
    $(PDK_FUSION_SYSIMG_FILES) \
    $(RECOVERY_RESOURCE_ZIP) \

从这里就可以看出，INTERNAL_SYSTEMIMAGE_FILES描述的就是从ALL_PREBUILT、ALL_COPIED_HEADERS、ALL_GENERATED_SOURCES、ALL_DEFAULT_INSTALLED_MODULES、PDK_FUSION_SYSIMG_FILES和RECOVERY_RESOURCE_ZIP中过滤出来的存放在TARGET_OUT目录下的那些文件，即在目标产品输出目录中的system子目录下那些文件。 ALL_PREBUILT:要拷贝到目标设备上去的文件。 ALL_COPIED_HEADERS:要拷贝到目标设备上去的头文件。 ALL_GENERATED_SOURCES:要拷贝到目标设备上去的由工具自动生成的源代码文件。 ALL_DEFAULT_INSTALLED_MODULES:要安装要目标设备上的所有的模块文件。 PDK_FUSION_SYSIMG_FILES是从PDK(Platform Development Kit)提取出来的相关文件。 RECOVERY_RESOURCE_ZIP描述的是Android的recovery系统要使用的资源文件，对应于/system/etc目录下的recovery-resource.dat文件。

2.$(INTERNAL_USERIMAGES_DEPS)

ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true)
INTERNAL_USERIMAGES_DEPS := $(SIMG2IMG)
INTERNAL_USERIMAGES_DEPS += $(MKEXTUSERIMG) $(MAKE_EXT4FS) $(E2FSCK)
ifeq ($(TARGET_USERIMAGES_USE_F2FS),true)
INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG) $(MAKE_F2FS)
endif
endif

ifeq ($(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs)
INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG)
endif

ifeq ($(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs)
INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG)
endif

INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))

ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY))
INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER)
endif

SELINUX_FC := $(TARGET_ROOT_OUT)/file_contexts
INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC)

从以上可以看出INTERNAL_USERIMAGES_DEPS描述的是制作system.img镜像所依赖的工具。例如，如果要制作的system.img使用的是yaffs2文件系统，那么对应工具就是mkyaffs2image。总结：也就是四小节提供镜像打包工具和所有需要的文件，这些文件在之前的编译中已经生成好了,然后交由三小节的build-systemimage-target函数使用build_image.py生成system.img镜像文件，这个镜像文件在target/product/xxx/obj/PACKAGING/systemimage_intermediates目录下，之后再由二小节中的拷贝函数将其拷贝到target/product/xxx目录下，xxx是产品名。

[转] Android编译系统分析五：system.img的生成过程

一.systemimage

二.$(INSTALLED_SYSTEMIMAGE)

2.1 `$(copy-file-to-target)`

2.2 assert-max-image-size

三.$(BUILT_SYSTEMIMAGE)

1.create-system-vendor-symlink

2.创建target/product/xxx/obj/PACKAGING/systemimage_intermediates目录并删除这个目录下的system_image_info.txt文件。

3.重新向system_image.info.txt中写入数据

4.使用build_image.py脚本生成system.img镜像文件。

四.$(FULL_SYSTEMIMAGE_DEPS)

1.$(INTERNAL_SYSTEMIMAGE_FILES)

2.$(INTERNAL_USERIMAGES_DEPS)

添加新评论

分类

最新文章

最近回复

归档

其它

[转] Android编译系统分析五：system.img的生成过程

一.systemimage

二.$(INSTALLED_SYSTEMIMAGE)

2.1 $(copy-file-to-target)

2.2 assert-max-image-size

三.$(BUILT_SYSTEMIMAGE)

1.create-system-vendor-symlink

2.创建target/product/xxx/obj/PACKAGING/systemimage_intermediates目录并删除这个目录下的system_image_info.txt文件。

3.重新向system_image.info.txt中写入数据

4.使用build_image.py脚本生成system.img镜像文件。

四.$(FULL_SYSTEMIMAGE_DEPS)

1.$(INTERNAL_SYSTEMIMAGE_FILES)

2.$(INTERNAL_USERIMAGES_DEPS)

添加新评论

分类

最新文章

最近回复

归档

其它

2.1 `$(copy-file-to-target)`